Hygger Pinpoint IC Temp Controller Aquarium Heater will be your best choice!

Specification

• Voltage: 110V-120V, 60HZ
• Power cord length: 5.5 ft

Available In

• Length: 8.7', 5~10 Gallons, 50 Watts
• Length: 9.8', 10~25 Gallons, 100 Watts
• Length: 10.7', 20~45 Gallons, 200 Watts
• Length: 12.3', 60~120 Gallons, 500 Watts
• Notice: Please read instruction and cautions of package box carefully before use, and keep it away from children.
• This titanium heater is not suitable for use in acrylic fish tank.
• DO NOT use heater alone, to avoid overheating, it must be worked with thermostat and temperature detector. Keep heater and thermal detector submerged
• Make sure the heater is completely submerged in the water before power on.
• Make sure the thermal detector is fully submerged when it's on duty.
• We recommend to install a water pump or wave pump to circulate water movement so that the whole aquarium area at the same temperature.
• Make sure heater placed horizontally and fully submerged when it's on duty.
• DO NOT put the aquarium heater into the sand as it will burn the case and casue electric leakage.
• As thermostat is not waterproof, please keep it away from aquarium. Stay dry.
• If you want to clean the fish tank or take out the heater, please DISCONNECT power and wait for 30 minutes to cool down.
• This heater is only suitable for indoor use.
• We don't suggest to use this temperature controller for other brand heater for security reasons.

Package included

• 1* Submersible Aquarium Heater
• 1* Thermostat with Detector
• 2* Suction Cups
• 1* User Manual
• Internaitonal customer beware of the local voltage. Any voltage over 120V will burn out the controller and heater without transformer.