The Power Filter Is Designed To Provide Maximum Surface Area And Optimum Dwell Times In All Stages Of The Filtration Process. New 5 Stage Filtration Systemstage 1 & 2: Mechanical- Poly/Foam Pad Effective Mechanical Filtration Is Essential For Efficient Chemical And Biological Filtration.

The Large Surface Area Of The Poly/Foam Pad Effectively Performs Two Stages Of Mechanical Filtration. The First Stage Of Porous Foam Traps Large Particles And The Second Stage Of Dense Polyester Captures Fine Debris. Stage 3: Chemical- Activated Carbon Insert The Fluval Activated Carbon Filter Insert Contains 100% Premium Research Grade Carbon, Which Provides Large Amounts Of Surface Area For Adsorption Of Undesirable Impurities.

The Activated Carbon Filter Insert Removes Unwanted Odors, Discoloration And Impurities, Resulting In A Crystal Clear Aquarium. Stage 4: Biological-Bio-Screen An Additional Hydraulic Circuit Conveys Part Of The Intake Water To The Bio-Screen Placed At The Top Of The Trickle Chamber Cover.

Fluvals Bio-Screen Removes Any Debris Before Dripping Into The Biological Chamber. It Also Ensures That The Water Pumped To The Trickle Chamber Is Evenly Spread Through All Areas Before It Drips On The C-Nodes, Which Are Contained In The Chamber. The Motion Of Water Dropping Slowly Through The Grids Mimics The Rain.

Stage 5: Biological- C-Nodes The Surface Of The C-Nodes Is Made Up Of A Complex Pore System That Provides Optimal Living Space For Beneficial Bacteria To Thrive And Enhance The Removal Of Ammonia And Nitrites. The New Star Shape Provides A Higher Filtration Surface And More Biological Power Than A Traditional Cartridge, Resulting In A Healthy Aquarium Environment.

Patented Refiltration Systemsometimes Delicate Fish And Plants Require A More Gentle Water Flow. Fluvals Patented Re-Filtration System Allows You To Control The Flow Rate Without Compromising Filtration Efficiency. When The Flow Rate Is Reduced, Up To 50% Of The Water Within The Filter Chamber Is Re-Processed Multiple Times. More Impurities Are Filtered Out, Creating A Healthier Tank With Sparkling Clean And Clear Waterwhats In The Box?

• Filter Cover
• Filter Case
• Leveling Device
• C-Nodes
• U Tube
• Telescopic Intake Tube
• Bio-Screen
• Mechanical Frame
• Chemical Basket
• Impeller Cover Assembly
• Impeller
• Biological Trickle Chamber With Cover
• Motor Unit With Seal Ringmedia And Accessoriesmedia Replacementfluval Poly/Foam: Replace Poly/Foam Every 4-6 Weeks. Biological C-Nodes: Replace Half The Quantity Every 6 Months. Never Replace All C-Nodes At Once. Activated Carbon Insert: Replace Activated Carbon Every 2-4 Weeks. Bio-Screen: Replace Bio Screen Every 2-3 Months. Motor O-Ring: Replace Once A Year To Prevent Leaking. Power Filter Maintenancefor Optimal Performance It Is Recommended To Clean The Impeller Cover Assembly Once A Year. The Motor Should Be Thoroughly Cleaned Every Three Months. Always Unplug The Fluval C Power Filter Prior To Cleaning. Remove Cover, Filter Media And Discard Water Remaining In The Filter Case. Thoroughly Rinse Collected Debris From The Case, Impeller Cover And Impeller Assembly Using Clear Lukewarm Water. The Intake ''U'' Tube And Extension Tube Can Be Cleaned With A Filter Stem Brush To Remove Any Buildup Of Deposits. When All Parts Have Been Cleaned And Thoroughly Rinsed, Reassemble Filter And Replace Any Scheduled Media. Install The Filter Once Again Back On The Aquarium Making Sure That The Filter Is Tipped Slightly Forward. Then Fill The Fluval C Filter Box With Aquarium Water. Finally Plug The Filter Into An Electrical Outlet And The Fluval C Power Filter Will Self-Prime And Begin Running In A Few Seconds. Model Fluval C2 Po